Thermomechanical surface instability at the origin of surface fissure patterns on heated circular MDF samples

When a flat sample of medium density fibreboard (MDF) is exposed to radiant heat in an inert atmosphere, primary crack patterns suddenly start to appear over the entire surface before pyrolysis and any charring occurs. Contrary to common belief that crack formation is due to drying and shrinkage, it was demonstrated for square samples that this results from thermomechanical instability. In the present paper, new experimental data are presented for circular samples of the same MDF material. The sample was exposed to radiant heating at 20 or 50 kW/m2, and completely different crack patterns with independent Eigenmodes were observed at the two heat fluxes. We show that the two patterns can be reproduced with a full 3-D thermomechanical surface instability model of a hot layer adhered to an elastic colder foundation in an axisymmetric domain. Analytical and numerical solutions of a simplified 2-D formulation of the same problem provide excellent qualitative agreement between observed and calculated patterns. Previous data for square samples together with the results reported in the present paper for circular samples confirm the validity of the model for qualitative predictions, and indicate that further refinements can be made to improve its quantitative predictive capability.Comment: 9 pages, 13 figures. New title and abstract, added experimental and simulation details and figures, conclusions unchanged. Matches the version published in Fire And Material

On the use of solitary waves for energy harvesting

In the last decade there has been an increasing attention on the use of highly- and weakly- nonlinear solitary waves in engineering and physics, such as shock mitigation, acoustic imaging and nondestructive evaluation. These waves can form and travel in nonlinear systems such as one-dimensional chains of particles. One engineering application of solitary waves is the fabrication of acoustic lenses. In this dissertation, an acoustic lens based on the propagation of highly nonlinear solitary waves is proposed. The lens is part of a novel energy harvester able to focus mechanical vibrations into a single point where a piezoelectric element converts the mechanical energy into electricity. The first step of this research was to investigate numerically and experimentally a novel acoustic lens composed by one-dimensional chains of spherical particles arranged to form a circle array in contact with a linear medium. The second step of the research was to incorporate the acoustic lens into an energy harvesting that includes a wafer-type lead zirconate titanate (PZT) transducer and an object tapping the array. The PZT transducer located at the designed focal point converts the mechanical energy carried by the stress waves into electricity to power a load resistor. The performance of the designed harvester was compared to a conventional non-optimized cantilever beam, and the results showed that the power generated with the nonlinear lens has the same order of magnitude of the beam. Moreover, the performance of the proposed harvester was compared to a similar system where the chains of particles were replaced by solid rods. The results demonstrated that the granular system generates more electricity. Moreover, some parametric studies were conducted to improve the harvesting performance of the proposed system. The materials and the geometry of the harvester were considered to enhance the power output of the harvester. Numerical models were built to predict the power output from harvesters designed with different materials and geometries. The design that produces the highest power output was selected as the best design. The best design was tested experimentally to validate the enhancement in energy harvesting capability as predicted in the previous numerical model

Dominant Eigenvalue-Eigenvector Pair Estimation via Graph Infection

We present a novel method to estimate the dominant eigenvalue and eigenvector pair of any non-negative real matrix via graph infection. The key idea in our technique lies in approximating the solution to the first-order matrix ordinary differential equation (ODE) with the Euler method. Graphs, which can be weighted, directed, and with loops, are first converted to its adjacency matrix A. Then by a naive infection model for graphs, we establish the corresponding first-order matrix ODE, through which A's dominant eigenvalue is revealed by the fastest growing term. When there are multiple dominant eigenvalues of the same magnitude, the classical power iteration method can fail. In contrast, our method can converge to the dominant eigenvalue even when same-magnitude counterparts exist, be it complex or opposite in sign. We conduct several experiments comparing the convergence between our method and power iteration. Our results show clear advantages over power iteration for tree graphs, bipartite graphs, directed graphs with periods, and Markov chains with spider-traps. To our knowledge, this is the first work that estimates dominant eigenvalue and eigenvector pair from the perspective of a dynamical system and matrix ODE. We believe our method can be adopted as an alternative to power iteration, especially for graphs.Comment: 13 pages, 8 figures, 3 table

ASCH-PUF: A "Zero" Bit Error Rate CMOS Physically Unclonable Function with Dual-Mode Low-Cost Stabilization

Physically unclonable functions (PUFs) are increasingly adopted for low-cost and secure secret key and chip ID generations for embedded and IoT devices. Achieving 100% reproducible keys across wide temperature and voltage variations over the lifetime of a device is critical and conventionally requires large masking or Error Correction Code (ECC) overhead to guarantee. This paper presents an Automatic Self Checking and Healing (ASCH) stabilization technique for a state-of-the-art PUF cell design based on sub-threshold inverter chains. The ASCH system successfully removes all unstable PUF cells without the need for expensive temperature sweeps during unstable bit detection. By accurately finding all unstable bits without expensive temperature sweeps to find all unstable bits, ASCH achieves ultra-low bit error rate (BER), thus significantly reducing the costs of using ECC and enrollment. Our ASCH can operate in two modes, a static mode (S-ASCH) with a conventional pre-enrolled unstable bit mask and a dynamic mode (D-ASCH) that further eliminates the need for non-volatile memories (NVMs) for storing masks. The proposed ASCH-PUF is fabricated and evaluated in 65nm CMOS. The ASCH system achieves "0" Bit Error Rate (BER, < 1.77E-9) across temperature variations of -20{\deg}C to 125{\deg}C, and voltage variations of 0.7V to 1.4V, by masking 31% and 35% of all fabricated PUF bits in S-ASCH and D-ASCH mode respectively. The prototype achieves a measured throughput of 11.4 Gbps with 0.057 fJ/b core energy efficiency at 1.2V, 25{\deg}C.Comment: This paper has been accepted to IEEE Journal of Solid-State Circuits (JSSC

Stochastic spin-orbit-torque device as the STDP synapse for spiking neural networks

Neuromorphic hardware as a non-Von Neumann architecture has better energy efficiency and parallelism than the conventional computer. Here, with numerical modeling spin-orbit torque (SOT) device using current-induced SOT and Joule heating effects, we acquire its magnetization switching probability as a function of the input current pulses and use it to mimic the spike-timing-dependent plasticity learning behavior like actual brain working. We further demonstrate that the artificial spiking neural network (SNN) built by this SOT device can perform unsupervised handwritten digit recognition with the accuracy of 80% and logic operation learning. Our work provides a new clue to achieving SNN-based neuromorphic hardware using high-energy efficiency and nonvolatile spintronics nanodevicesComment: 8 pages, 5 figure

Efficient characteristics of exchange coupling and spin-flop transition in Py/Gd bilayer using anisotropic magnetoresistance

The interlayer antiferromagnetic coupling rare-earth/transition-metal bilayer ferrimagnet systems have attracted much attention because they present variously unusual temperature-and field-dependent nontrivial magnetic states and dynamics. These properties and the implementation of their applications in spintronics highly depend on the significant temperature dependence of the magnetic exchange stiffness constant A. Here, we quantitatively determine the temperature dependence of magnetic exchange stiffness A_{Py-Gd} and A_{Gd} in the artificially layered ferrimagnet consisting of a Py/Gd bilayer, using a measurement of anisotropic magnetoresistance (AMR) of the bilayer thin film at different temperatures and magnetic fields. The obtained temperature dependence of A_{Py-Gd} and A_{Gd} exhibit a scaling power law with the magnetization of Gd. The critical field of spin-flop transition and its temperature dependence can also be directly obtained by this method. Additionally, the experimental results are well reproduced by micromagnetic simulations with the obtained parameters A_{Py-Gd} and A_{Gd}, which further confirms the reliability of this easily accessible technique.Comment: 5 pages, 4 figure

Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries

Abstract The demand for lithium-ion batteries (LIBs) with high mass-specific capacities, high rate capabilities and long-term cyclabilities is driving the research and development of LIBs with nickel-rich NMC (LiNixMnyCo1−x−yO2, $$x \geqslant 0.5$$x⩾0.5) cathodes and graphite (LixC6) anodes. Based on this, this review will summarize recently reported and widely recognized studies of the degradation mechanisms of Ni-rich NMC cathodes and graphite anodes. And with a broad collection of proposed mechanisms on both atomic and micrometer scales, this review can supplement previous degradation studies of Ni-rich NMC batteries. In addition, this review will categorize advanced mitigation strategies for both electrodes based on different modifications in which Ni-rich NMC cathode improvement strategies involve dopants, gradient layers, surface coatings, carbon matrixes and advanced synthesis methods, whereas graphite anode improvement strategies involve surface coatings, charge/discharge protocols and electrolyte volume estimations. Electrolyte components that can facilitate the stabilization of anodic solid electrolyte interfaces are also reviewed, and trade-offs between modification techniques as well as controversies are discussed for a deeper understanding of the mitigation strategies of Ni-rich NMC/graphite LIBs. Furthermore, this review will present various physical and electrochemical diagnostic tools that are vital in the elucidation of degradation mechanisms during operation to supplement future degradation studies. Finally, this review will summarize current research focuses and propose future research directions. Graphic Abstract The demand for lithium-ion batteries (LIBs) with high mass specific capacities, high rate capabilities and longterm cyclabilities is driving the research and development of LIBs with nickel-rich NMC (LiNixMnyCo1−x−yO2, x ≥ 0.5) cathodes and graphite (LixC6) anodes. Based on this, this review will summarize recently reported and widely recognized studies of the degradation mechanisms of Ni-rich NMC cathodes and graphite anodes. And with a broad collection of proposed mechanisms on both atomic and micrometer scales, this review can supplement previous degradation studies of Ni-rich NMC batteries. In addition, this review will categorize advanced mitigation strategies for both electrodes based on different modifications in which Ni-rich NMC cathode improvement strategies involve dopants, gradient layers, surface coatings, carbon matrixes and advanced synthesis methods, whereas graphite anode improvement strategies involve surface coatings, charge/discharge protocols and electrolyte volume estimations. Electrolyte components that can facilitate the stabilization of anodic solid-electrolyte interfaces (SEIs) are also reviewed and tradeoffs between modification techniques as well as controversies are discussed for a deeper understanding of the mitigation strategies of Ni-rich NMC/graphite LIBs. Furthermore, this review will present various physical and electrochemical diagnostic tools that are vital in the elucidation of degradation mechanisms during operation to supplement future degradation studies. Finally, this review will summarize current research focuses and propose future research directions